注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

chjz4612 的博客

拼布大姐

 
 
 

日志

 
 

【转载】几何条纹套头衫-Tribeca Tunic 原文图解  

2015-06-02 13:30:00|  分类: 钩编教程 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
为冬天做准备的英文图解,看上衣服的样子和板型,但原版的用线是晴纶线,几何条纹套头衫-Tribeca Tunic 原文图解 - Tina - Tina的手工编织的博客 。
几何条纹套头衫-Tribeca Tunic - Tina - Tina的手工编织的博客


GAUGE:

*Modern Baby (Article #924). 50% Acrylic, 50% Nylon; package size: 2.60oz/75.00 gr. (173yds/158m) pull skeins

*Vanna's Glamour (Article #861). 96% Acrylic, 4% Metallic Polyester; package size: 1.75oz/49.61 gr. (202yds/185m) pull skeins

 
20 sts + 38 rows = about 4 in. (10 cm) in Garter st (k every row) with A.

When you match the gauge in a pattern, your project will be the size specified in the pattern and the materials specified in the pattern will be sufficient. The needle or hook size called for in the pattern is based on what the designer used, but it is not unusual for gauge to vary from person to person. If it takes you fewer stitches and rows to make your swatch, try using a smaller size hook or needles; if more stitches and rows, try a larger size hook or needles.

Making a Gauge Swatch 


NOTES:

1. Tunic is worked in 2 pieces: Back and Front.
2. Back and Front are each worked in 5 Panels: Lower Panel, Center Panel, Right Side Panel, Upper Panel, and Left Side Panel. Construction details are shown on the diagram.
3. The Front has a pocket!
4. Yarn color is changed to make stripes. Do not cut yarn between color changes, simply carry the unused color along the side edge of your work.
5. A circular needle is used to accommodate the width of the pieces. Work back and forth in rows on circular needle as if working with straight needles for everything except neck edging. Work neck edging in rnds.


STRIPE SEQUENCE

Work *2 rows with A, 2 rows with B; rep from * for Stripe Sequence.

BACK


几何条纹套头衫-Tribeca Tunic 原文图解 - Tina - Tina的手工编织的博客

 

Lower Panel
With longer circular needle and A, cast on 90 (111, 129) sts. Working back and forth in rows on the circular needle, work in Garter st (k every row) until piece measures about 9 (9 1/2, 10) in. (23 (24, 25.5) cm) from beg.
Center Panel
Row 1 (RS):
With A, bind off 29 (36, 42) sts, join B and bind off 1 st, with B, k to end of row – 60 (74, 86) sts.
Place marker in first st of this row for beg location of Right Side Panel.
Row 2: With B, knit.
Change to A.
Work in Garter st, changing color following Stripe Sequence until Center Panel measures about 6 in. (15 cm); end with a RS row worked with A as the last row you work.
Next Row (WS): With A, bind off 30 (37, 43) sts, k to end of row – 30 (37, 43) sts.
Place marker in first st of this row for end location of Left Side Panel.
Change to B.
Work in Garter st and Stripe Sequence until Center Panel measures about 12 in. (30.5 cm); end with a WS row worked with B as the last row you work.
Cut yarns and slip rem sts to a holder.
Right Side Panel
From RS, join A at marker in corner between Lower Panel and Center Panel; pick up and k60 sts spaced as evenly as possible across side edge of Center Panel between marker and st holder.
Next Row (WS): With A, knit.
Change to B.
Work in Garter st and Stripe Sequence until Right Side Panel measures same as Lower Panel bind-off edge.
Bind off.
Upper Panel
From RS, join A at top right corner of Right Side Panel; pick up and k30 (37, 43) sts spaced as evenly as possible across

top edge of Right Side Panel; then k30 (37, 43) Center Panel sts from holder – 60 (74, 86) sts.
Next Row (WS): With A, knit.
Change to B.

Work in Garter st and Stripe Sequence until Upper Panel measures about 5 3/4 in. (14.5 cm); end with a RS row worked with B as the last row you work.
Shape Neck

Next Row (WS): With B, bind off 37 (43, 46) sts, k to end of row – 23 (31, 40) sts.
With A, knit 2 rows.
Bind off.

Left Side Panel

From RS, join A at top left corner of Upper Panel, pick up and k29 sts spaced as evenly as possible across side edge of Upper Panel and 30 sts across side edge of Center Panel to marker on left edge of Panel – 59 sts.
Next Row (WS): With A, knit.
Change to B.
Work in Garter st and Stripe Sequence until Left Side Panel measures about 1 1/2 (1, 1) in. (4 (2.5, 2.5) cm); end with a WS row as the last row you work.
Next Row (RS): Cast on 1 st for neck, k to end of row – 60 sts.
Work in Garter st and Stripe Sequence until Left Side Panel measures same as Center Panel bind-off edge.
Bind off.

Following diagram, sew lower side edge of Right Side Panel to Lower Panel bind-off edge. Sew lower side edge of Left Side Panel to Center Panel bind-off edge. 




FRONT

几何条纹套头衫-Tribeca Tunic 原文图解 - Tina - Tina的手工编织的博客

 

Work same as Back to Upper Panel.

Upper Panel

From RS, join A at top right corner of Right Side Panel, pick up and k30 (37, 43) sts spaced as evenly as possible across top edge of Right Side Panel, then k30 (37, 43) Center Panel sts from holder – 60 (74, 86) sts.

Next Row (WS): With A, knit.
Change to B.
Work in Garter st and Stripe Sequence until Upper Panel measures about 5 1/2 in. (14 cm); end with a RS row worked with A as the last row you work.
Shape Neck
Next Row (WS):
With A, bind off 37 (43, 46) sts, k to end of row – 23 (31, 40) sts.
With B, knit 2 rows.
With A, knit 2 rows.
Bind off.

Left Side Panel

From RS, join A at top left corner of Upper Panel, pick up and k27 sts spaced as evenly as possible across side edge of Upper Panel and 30 sts across side edge of Center Panel to marker on left edge of Panel – 57 sts.

Next Row (WS): With A, knit. 


Change to B.
Work in Garter st and Stripe Sequence until Left Side Panel measures about 1 1/2 (1, 1) in. (4 (2.5, 2.5) cm); end with a WS row as the last row you work.
Next Row (RS): Cast on 3 sts for neck, k to end of row – 60 sts.
Work in Garter st and Stripe Sequence until Left Side Panel measures same as Center Panel bind-off edge.
Bind off.
Sew lower side edge of Left Side Panel to Center Panel bind-off edge.
Leave lower side edge of Right Side Panel unsewn – this makes the pocket!
Pocket
Hold Front upside down, with cast-on edge at top.
From RS, referring to diagram, place a marker on free side edge of the Right Side Panel, about 1 in. (2.5 cm) from outer edge of Front.
From RS, join C at beg of marked edge (in inside corner). Pick up and k25 (32, 38) sts spaced as evenly as possible across edge to marker.
Next Row (WS): Purl.
Continue in St st (k on RS, p on WS) until pocket measures about 8 in. (20.5 cm).
Bind off.
Fold pocket in half, with RS tog. Sew bound-off edge of pocket to WS of bound-off edge of Lower Panel. Seam sides of pocket. Sew rem 1 in. (2.5 cm) of side edge of Right Side Panel and top edge of Lower Panel tog.


FINISHING

Sew shoulder seams.

Neck Edging

From RS with shorter circular needle and C, working around neck edge beg at right shoulder seam, pick up and k2 sts along right back shoulder, 54 (57, 60) sts spaced as evenly as possible across back neck, 2 sts along left back shoulder to seam, 4 sts along left front shoulder, 54 (57, 60) sts spaced as evenly as possible across front neck, and 4 sts along right front shoulder – 120 (126, 132) sts.

Note: After working a few rows, you may decide that your band would look better if you had picked up more or fewer sts than the amount indicated for your size. Since a well-balanced band adds a beautiful finishing touch to your Tunic, we strongly recommend that if you've any doubts, simply pull out the sts and adjust the number that you pick up. The pattern instruction reflects the number that the designer picked up – but everyone's knitting is a bit different.

Place marker for beg of rnd and join by working the first st on the left hand needle with the working yarn from the right hand needle.
Knit 2 rnds.
Bind off.

Armhole Edging

Place markers on side edges of Front and Back about 7 1/2 (8, 8 1/2) in. (19 (20.5, 21.5) cm) down from shoulder seams.
From RS with shorter circular needle and C, pick up and k84 (90, 96) sts spaced as evenly as possible across armhole edge between markers.

Purl 1 row.
Knit 1 row.
Bind off.
Rep for other armhole.

Sew side seams of Front and Back (including ends of armhole edging), leaving lower 6 in. (15 cm) unsewn for side slits.
Weave in ends.


ABBREVIATIONS / REFERENCES

Click for explanation and illustration

beg = begin(s)(ning)

k = knit

p = purl

rem = remain(s)(ing)

rep = repeat(s)(ing)

rnd(s) = round(s)

RS = right side

St st = Stockinette stitch

st(s) = stitch(es)

tog = together

WS = wrong side


 


 

  评论这张
 
阅读(59)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017